Arm9LoaderHax è un modifica ormai obsoleta!

Invece di Arm9LoaderHax installate boot9strap

Se avete Arm9LoaderHax già installato nella vostra consolle, aggiornate da A9LHax a boot9strap

Sezioni della guida: ❖ Risoluzione problemi ❖ Decrypt9 ❖ 2.1.0 ctrtransfer ❖ A9Lhax per 2.1 ❖ A9Lhax per 9.x/11.x ❖ Aggiornare A9LHax ❖ A9LH e Gateway ❖

Procedimento

1. Scaricate BootCTR
2. Decomprimete quel file e inserite tutti i file nella root della SD
3. Aprite con Blocco note il file boot_config.ini e modificatelo così:

   1. ;Comments starts with ";" or "#", so you need to remove it first to the
      ;line actually do something.
      [BOOTCTR9]
      screenEnabled = 1
      screenLog = 0
      fileLog = 0
      key_delay = 1000
      boot_splash = 3
      boot_splash_image = /arm9loaderhax/image2.bin
      screenBrightness = 0xFF
      
      [DEFAULT]
      path = /GW.bin
      delay = 100
      offset = 0
      payload = -1
      splash = 1
      
      [KEY_L]
      path = /Luma.bin
      delay = 1000
      offset = 0
      payload = -1
      splash = 1
      
      [KEY_R]
      path = /Luma.bin
      delay = 1000
      offset = 0
      payload = -1
      screenEnabled = 1
      splash = 1
      
      [KEY_SELECT]
      path = /Luma.bin
      delay = 1000
      offset = 0
      payload = -1
      screenEnabled = 1
      splash = 1
      
      [KEY_X]
      path = /Decrypt9WIP.bin
      delay = 1000
      offset = 0
      payload = 1
      splash = 3
      screenEnabled = 1
      
      [KEY_Y]
      path = /EmuNAND9.bin
      delay = 1000
      offset = 0
      payload = 1
      splash = 3
      screenEnabled = 1
      
      [KEY_START]
      path = /Hourglass.bin
      delay = 1000
      offset = 0
      payload = 1
      splash = 3
      screenEnabled = 1
      
      ;Each key can be defined using a section, like the example below. Section
      ;names must be ALL caps, and between "[]". Valid keys:
      ; * Common keys: KEY_A, KEY_B, KEY_X, KEY_Y, KEY_L, KEY_R, KEY_SELECT,
      ; KEY_START.
      ; * D-PAD: KEY_DUP, KEY_DDOWN, KEY_DLEFT, KEY_DRIGHT.
      ;You MUST set at least "path" for each section, and it is the ONLY option you
      ;should set in the majority of cases.
      ;You may pass a .3dsx file or a .dat/.bin payload, the file type is detect
      ;automatically based on extension. Double check the path, since it must be
      ;correct (including caps).
      ;[KEY_CPAD_LEFT] ;MUST BE ALL CAPS
      ;path = /And/Respect_Caps_in_Path.3dsx
      
      ;Boot examples for almost every CFW out there.
      ;You can use both .3dsx files or binary (.bin, .dat) payloads
      ;[KEY_A]
      ;path = /rxTools/sys/code.bin
      ;[KEY_B]
      ;path = /Cakes.dat
      ;[KEY_X]
      ;path = /3ds/GW/GW.3dsx
      ;[KEY_Y]
      ;path = /ReiNand.dat
      
      ;An important remark: the majority of CFWs set L button to show menu instead
      ;of autobooting. So it is generally a bad idea to set L button to CFW boot,
      ;or the CFW menu will be shown instead of booting directly to CFW.
      ;[KEY_L]

4. Inserite il file arm9loaderhax.bin di Gateway nella root della SD e rinominatelo GW.bin
5. Inserite il file arm9loaderhax.bin di Luma nella root della SD e rinominatelo Luma.bin
6. Inserite il file Decrypt9WIP.bin nella root della SD
7. Inserite il file EmuNAND9.bin nella root della SD
8. Inserite il file Hourglass9.bin nella root della SD
9. Inserite il file Launcher.dat più aggiornato nella root della SD
10. Adesso, all’accensione del 3DS dovreste entrare nel Menu Gateway